Drawers replacement

Last updated 26/02/2021 05:55

Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.

Always take care when moving appliances, for heavy appliances it's necessary two persons to move it. 

Always use safety gloves and enclosed footwear.

Please note that self-repair or nonprofessional repair can have safety consequences if not done properly


Drawers replacement

There are different types of drawers, and the description and pictures provide support to identify the drawer and the correspondent replacement process. 

Low temperature compartment drawer

To remove the drawer from a compartment: 

1.Pull the drawer out.

Word import image

Slide drawers

To remove a drawer from a compartment: 

1.Pull the drawer out until it stops.

2.Once you reach the end of the runners, lift slightly the front of the drawer and remove it from the appliance.

Word import image

To put the drawer into a compartment, follow the above steps in reverse order.

Vegetable drawer with rails

To remove the drawer (e.g. for cleaning): 

1. Pull out the drawer and lift it up.

Word import image

2. Push the rails inside the cabinet to avoid damage to the appliance when closing the door.

Word import image

To reassemble: 

1. Pull out the rails.

Word import image

2. Place the rear part of the drawer (1) on the rails.

Word import image

3. Keep the front of the drawer (2) lifted up while pushing the drawer in. 

4. Press the front part of the drawer downwards. 

Word import image

Pull out the drawer again and check if it is placed correctly on both rear and front hooks.


Extra Zone drawer

To remove the Extra Zone from the fridge cabinet follow the steps below:

1.Pull out the vegetable drawer from the refrigerator.

Word import image

2.Lift the Extra Zone compartment and pullout the glass cover with humidity control from underneath it.

Word import image

3.Hold the drawer together with the glass cover of the Extra Zone compartment and pull them towards yourself.

Word import image

4.Tilt the module downwards to remove it from the refrigerator.

Word import image

To put the drawer into a compartment, follow the above steps in reverse order.


FreshBox drawer

It is recommended to empty the FreshBox drawer before removing it from the refrigerator.

To remove the drawer:

1.Remove glass shelves above the drawer.

2.Lift up the front of the drawer.

3.Pull the drawer together with the glass cover towards yourself until the left recess (1) matches the front shelf support (2).

Word import image

4.Rotate the whole drawer about 90°clockwise until you will be able toremove it safely from the fridge.

Word import image

To put the drawer into a compartment, follow the above steps in reverse order.


ExtraChill drawer

To remove the drawer:

1.Hold the drawer together with the glass cover of the ExtraChill and pull them towards yourself.

Word import image

2.Tilt the module downwards to remove it from the refrigerator.

Word import image

To put the drawer into a compartment, follow the above steps in reverse order.