How to remove Door hinge and micro-switch lever

Last updated 19/02/2024 08:11


All the work to be performed inside the appliance requires specific skills and knowledge and may only be carried out by qualified and authorized Service Engineers  

This platform is not fitted with an ON/OFF switch.  

Before you access internal components, take the plug out of the socket to disconnect the power supply.  

Some of the components in the mechanical part could cause injuries, so wear suitable protection and proceed with caution.  

Always empty the appliance of all the water before laying it on its side.  

If the appliance has to be placed on its side for maintenance or another reason, lie it on its left side, to avoid the risk of any residual water falling onto the main circuit board.

Loosen the screws securing it to the cabinet.

Word import image

Loosen the 13 perimetral screws that attach the inner door frame.

Word import image

1. Door Hinge

2. Internal door frame

Word import image

3. Internal pane

Word import image

4. External pane

Word import image

HingeDoor micro-switch lever
Word import image 
To remove the hinge, simply slide off the pin that secures it to the back frame.To remove the door micro-switch lever, press two fastening clips. 
Push the lever until you have removed it completely.