How to remove door latch hinge and micro-switch lever (tumble dryer)

Last updated 27/12/2023 13:40


All the work to be performed inside the appliance requires specific skills and knowledge and may only be carried out by qualified and authorized Service Engineers  

This platform is not fitted with an ON/OFF switch.  

Before you access internal components, take the plug out of the socket to disconnect the power supply.  

Some of the components in the mechanical part could cause injuries, so wear suitable protection and proceed with caution.  

Always empty the appliance of all the water before laying it on its side.  

If the appliance has to be placed on its side for maintenance or another reason, lie it on its left side, to avoid the risk of any residual water falling onto the main circuit board.

1. Loosen the screws securing it to the cabinet. 

2. Loosen the 13 perimetral screws that attach the inner door frame. Carefully open the door by pushing the glass element.


Loosen the 2 screws that attach the latch. 


To remove the hinge, simply slide off the pin that secures it to the back frame

Door micro-switch lever 

To remove the door micro-switch lever, press two fastening clips. Push the lever until you have removed it completely. 

Spare parts & Accessories
Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.