How to disassemble and assemble the door safety interlock (2)

Last updated 23/02/2021 06:47

Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.

Always take care when moving appliances, for heavy appliances it's necessary two persons to move it. 

Always use safety gloves and enclosed footwear.

Please note that self-repair or nonprofessional repair can have safety consequences if not done properly


Remove the plastic ring fixing the bellows seal to the cabinet.

Release the bellows seal from the cabinet. 

Unfasten the two screws securing the door safety interlock to the front panel.

Take the device and move it to the left.

Turn it towards the inside (right-hand side of the flange).

Pull it out towards the right and remove it.

Pull out the wiring protection from the door safety device.

Disconnect the connector

To reassemble the door safety device, repeat the same operations in reverse.

Before tightening the screws to secure the door safety device to the front panel, make sure the flange is positioned properly on the outside as indicated by the arrows.

Tighten the screws at a torque of 2.5 Nm.